lunes, 4 de marzo de 2013

ALCOHOL VS QUATS AS SANITIZERS

What are quat-based hand sanitizers? How do they work?
Quat-based hand sanitizers are made with quaternary surfactants that destroy the cell integrity of bacteria and germs.  
— Dan Renner, Director of Marketing, Kutol Products Co., Sharonville, Ohio 


Quat-based sanitizers have additives to increase their antimicrobial effectiveness.
— Katharina Versluis, Marketing Manager, Gent-l-kleen Products Inc., York, Pa.

Quats are Quaternary Ammonium Compounds (QUATS) and the more common ones used are benzethoniumchloride (BEC) or benzalkoniumchloride (BZK). QUATS are typically found in hard surface type sanitizing applications ‚Äì inanimate, nonliving surfaces. This versus alcohol which is used in sanitizing applications on living tissue, i.e. skin. 

Studies have shown that QUATS are more irritating to the skin and they are not good for the environment. Further to this, the FDA has not approved the use of QUATS as a leave on application; they must be rinsed off. In recent years, the FDA has been enforcing its rulings requiring companies who manufacture QUAT based products to remove or change claims that market the product as a leave on hand sanitizer.  

QUATS work by breaking down the cell walls and ultimately killing the germ, thus contact time is important to ensure kill. Alcohol (at the FDA recommended level of at least 60 percent) kills germs on contact which usually means within the 15 seconds that it was tested to. Currently, the FDA guidelines state that hand sanitizers must contain at least 60 percent ethyl alcohol and BSCs should look for this on the label as a standard.  And, as of this date, the FDA has not approved non-alcohol based hand sanitizers for use as leave-on products; again, they must be rinsed off.
— Lori Huffman, Head of Marketing, North America, STOKO An Evonik Brand, Greensboro, N.C.


Do non-alcohol-based hand sanitizers, such as quat-based sanitizers, have benefits over alcohol-based products? Any facilities I should or should not use quat-based sanitizers?
Yes, quat-based hand sanitizers are not flammable, do not sting on cuts and chapped hands and have a pleasant scent versus alcohol based sanitizers.  Schools and prisons are ideal for quat-based sanitizers, where the dangers of alcohol based products may be a concern.— Dan Renner, Director of Marketing, Kutol Products Co., Sharonville, Ohio 


Quat-based products have a greater risk of causing contact allergies and can leave a sticky residue on skin. Additionally, these sanitizers can become more easily contaminated. Depending on the percentage of Ethyl Alcohol in the product, alcohol-based sanitizers have have been proven to kill 99.99 percent or more of (bacteria) micro-organisms.
— Katharina Versluis, Marketing Manager, Gent-l-kleen Products Inc., York, Pa.


Because the FDA has not approved QUATS as a leave on product, together with issues of less desirable skin compatibility and environmental friendliness, we do not recommend sanitizers that contain these ingredients.  
— Lori Huffman, Head of Marketing, North America, STOKO An Evonik Brand, Greensboro, N.C.

Publicado por EMILIO MALAGUTI en 9:03

No hay comentarios:

Publicar un comentario

Suscribirse a: Enviar comentarios (Atom)

Vistas de página en total

GREEN CHEMICALS

The Green Seal certification is granted by the organization with that name and has a great number of members contributing with the requirements to pass a raw material or a chemical product as "green". Generally for a material to be green, has to comply with a series of characteristics like: near neutral pH, low volatility, non combustible, non toxic to aquatic life, be biodegradable as measured by oxygen demand in accordance with the OECD definition.
Also the materials have to meet with toxicity and health requirements regarding inhalation, dermal and eye contact. There is also a specific list of materials that are prohibited or restricted from formulations, like ozone-depleting compounds and alkylphenol ethoxylates amongst others. Please go to http://www.greenseal.com/ for complete information on their requirements.
For information on current issues regarding green chemicals, see the blog from the Journalist Doris De Guzman, in the ICIS at: http://www.icis.com/blogs/green-chemicals/.
Certification is an important — and confusing — aspect of green cleaning. Third-party certification is available for products that meet standards set by Green Seal, EcoLogo, Energy Star, the Carpet & Rug Institute and others.
Manufacturers can also hire independent labs to determine whether a product is environmentally preferable and then place the manufacturer’s own eco-logo on the product; this is called self-certification. Finally, some manufacturers label a product with words like “sustainable,” “green,” or “earth friendly” without any third-party verification.
“The fact that there is not a single authoritative standard to go by adds to the confusion,” says Steven L. Mack M.Ed., director of buildings and grounds service for Ohio University, Athens, Ohio.
In www.happi.com of June 2008 edition, there is a report of Natural formulating markets that also emphasises the fact that registration of "green formulas" is very confused at present, due to lack of direction and unification of criteria and that some governmental instittion (in my opinion the EPA) should take part in this very important issue.